| 1. | A new method for loaded tooth contact analysis of spiral bevel gears with friction
弧齿锥齿轮的有摩擦承载接触分析 |
| 2. | Tooth contact analysis of spiral bevel gears based onthe design of transmission error
基于传动误差设计的弧齿锥齿轮啮合分析 |
| 3. | Tooth contact analysis
轮齿接触分析 |
| 4. | Analyse the tooth contact analysis of klingelnberg cyclo - palloid spiral bevel gear
对克林贝格摆线齿锥齿轮进行齿面接触分析。 |
| 5. | The mathematical model of loaded tooth contact analysis of spiral bevel gears has been established based on elastic dynamics and the dimensional finte element analysis method
基于弹性力学和有限元法，建立了螺旋锥齿轮加载接触分析的数学模型。 |
| 6. | The paper synthesises the conditions of loaded tooth contact analysis , fully considers all esalstic deflection of gears and support system , the deflection of gears and support system , the deflection of the contact region , therefore , the program may simulate the real work conditions
本文系统地分析了齿轮加载接触状态，充分考虑了齿轮以及支承系统在载荷作用下发生的各种弹性变形、接触区变形。因此，编制的计算机程序能模拟实际工作状态。 |
| 7. | Firstly , a simple and practical representing method of the tooth edge tangential vector is applied to replace the traditional differential formula , the simple solving technique of edge contact problem makes the geometric edge contact analysis of the complex curve surface realize . secondly , using numerical searching and mathematical programming method solves the contact directions and loaded contact problem . finally , whole numerical simulation method is provided for loaded tooth contact analysis of high contact ratio spiral bevel gears
首先以一种简单实用的轮齿边缘切矢量的数学表示方法取代了经典的微分表达式，大大简化了几何边缘接触的求解，使复杂曲面的几何边缘接触分析得以实现；其次又采用数值搜索与数学规划法求解了边缘接触的主方向和承载接触问题，为高重合度弧齿锥齿轮承载啮合全过程的数值仿真提供了完整的方法。 |
| 8. | In order to solve the problems of which the spiral bevel gear of oerlikon type is necessary to out and modify repeatedly , a new method was developed to predict the contact pattern and greatly reduce the cost for manufacturing by means of building a tooth contact analysis model of prolate epicycloids bevel and hypoid gears for oerlikon skm2
摘要为解决奥利康锥齿轮加工过程中需要反复试切、修正的问题，根据奥利康skm2机床建立了加工延伸外摆线齿锥齿轮和准双曲面齿轮的齿面接触分析模型，提出了一种可预测齿面接触质量、降低设计加工成本的新方法。 |
| 9. | With regard to the restrains of geometries boundaries of the surface , we have finished the tooth contact analyses ( tca ) and precisely drawn the actual contacting area on the surface . the relations between the total length of the actual contacting lines and the rotating angle of worm gear are also revealed in this dissertation
为了获得蜗轮轮齿齿面的准确描述，按共轭理论计算了蜗轮齿面的实际接武汉理工大学博士学位论文触线，通过考虑蜗轮齿面的实际几何约束，确定了蜗轮齿面的实际啮合区，并运用数值方法精确计算了蜗轮齿面的边界线。 |
